Toll free:+86-400 882 8982 中文 ENG
  • Copper Alloys for Plastic Injection Molding Review

    Copper alloys are attractive to the mold industry because of their high thermal conductivity, ease of machining by a variety of processes, and corrosion resistance to water, cooling fluids and the pla

    2019-08-21 14:31:11

  • Alloy Design and the Reason We Do It

    In the field of engineering we are typically using only up to 1000 different types of metallic alloys on a regular basis. This is a very tiny fraction of potentially interesting alloys.  Nexteck

    2019-07-26 11:12:27

  • Nickel Chrome Alloy as Resistance Material and Heating Element

    The nickel-chromium system shows that chromium is quite soluble in nickel. This is a maximum at 47% at the eutectic temperature and drops off to about 30% at room temperature. A range of commercial al

    2019-07-05 11:30:26

  • Alloys are Generally Used in Electrical Wires and Cables

    In general, wiring in our home and devices are pure or at least 99.9% pure copper due to difficulties of purification. Phone chargers, or microphones are also use copper. You will however feel a diffe

    2019-06-26 15:25:47

  • Copper-Nickel Alloy for Automotive Vehicle

    CuNi10, an alloy of 90% copper and 10% nickel, is especially noted for low resistivity and high resistance to oxidation and chemical corrosion. Due to its corrosion resistance edge, this copper nickel

    2019-06-14 17:13:03

  • High Strength Copper-Titanium Alloys

    Cu–Ti alloys are now receiving a great deal of attention as ultra-high strength conductive materials for applications such as conductive springs, interconnections etc. essentially displacing the conve

    2019-06-10 15:34:28

  • Copper-Nickels Properties and Marine Application

    The addition of nickel to copper improves strength and corrosion resistance without reducing the good ductility. Due to copper-nickel alloys'  excellent resistance to seawater corrosion, 

    2019-05-27 14:57:05

  • Beryllium-Copper' Feature and Usage

    Beryllium-copper, available in sheet, strip, foil, wire, rod, tube and forgings, is the hardest (HV 100-420) and strongest (tensile strength 410-1400 N/mm2) of any copper alloy in the fully heat treat

    2019-05-24 12:01:45

  • Copper and Copper Alloys

    Copper and copper alloys provide many property combinations suited to a wide range of applications that facilitate and enhance our daily lives. There are more than 400 copper alloys, each with a uniqu

    2019-05-22 11:00:31

  • Alloys Applied to Aerospace Industry

    Nexteck can provide metal alloys in a variety of grades and forms to meet your aerospace needs. Our vast inventory includes inconel, super alloy, titanium alloy,  nichrome and colomony available

    2019-05-20 17:19:39

  • Nickel-Base Alloys for Power Generation

    Nexteck, a reliable supplier capable of delivering alloys in various  shapes and sizes, processes to your specifications and provides value-added services to meet unique needs. Energize your

    2019-05-15 10:18:30

  • Alloys' Properties and Advantages

    Pure metals possess few important physical and metallic properties, such as melting point, boiling point, density, specific gravity, ductility, high malleability, heat and electrical conductivity. The

    2019-05-14 16:34:27

  • Nickel Chrome Alloys' Properties

    A range of commercial nickel chromium alloys is based on this solid solution. Such nickel chromium alloys have excellent resistance to high temperature oxidation and corrosion and good wear resistance

    2019-05-10 14:05:22

  • Copper-Nickel Alloys Application and Features

    Copper-nickel alloys, also refer to as cupronickel, are widely used for marine applications due to their excellent resistance to seawater corrosion, good fabricability and low macrofouling rates . The

    2019-05-08 15:53:42

  • Titanium Alloy, Nickel Alloy, Aluminum Alloy and Copper- Nickel Alloy Material for Marine Application

    Alloy materials mainly include titanium alloy, nickel alloy, aluminum alloy and copper-nickel alloy. Titanium is one of the best corrosion resistant materials. The titanium alloy with good corrosion r

    2019-04-08 12:11:29

  • Metal Alloys' Combination and Properties

    Individual pure metals may possess benefit properties, such as good electrical conductivity, high hardness and strength, or corrosion and heat resistance. Metal alloy manufactures attempt to comb

    2019-04-24 18:29:16

  • Copper Alloy Flat Wire's Technological Innovation and Traditional Manufacture Method

    Copper flat wire is manufactured by flattening round wire and then annealing. For products with high surface quality, tolerance and performance of copper flat wire, it is necessary to add a single dra

    2019-04-17 18:18:35

  • What are the Advantages of Nickel-Based Alloys Used in Supercritical Water Oxidation Plants?

    Alloy materials are one of the first choice for metal materials in the field of corrosion resistant materials. In many high corrosion environments, other metal materials can not meet the requirements

    2019-04-15 15:05:34

  • What are the Advantages of the Iron-Chromium-Aluminum Electrothermal Alloy?

    The disadvantage of FeCrAl electrothermal alloy is that its high temperature strength is low and its plasticity increases with the increase of temperature. Materials above 1000 ℃ are often deformed du

    2019-04-10 14:33:52

  • What is the Significance of Superalloy Materials in Iron and Steel Production?

    There are many kinds of alloy materials in metal materials. The superalloys are very important types. We usually call this alloy heat-resistant alloy materials. This metal material is of great signifi

    2019-04-03 15:11:49

  • Electrothermal Alloy is An Important Industrial Alloy Material

    Alloy material is an important industrial raw material in the 21 century. Industrial metal elements play an irreplaceable advantage in industrial production in different fields. The application of all

    2019-01-10 17:58:11

  • Electrothermal Alloy is an Important Industrial Alloy Material

    Alloy materials are an important industrial raw material in the 21st century. Industrial metal elements play an irreplaceable advantage in industrial production in different fields. The use of alloy m

    2018-12-14 19:13:45

  • Copper Nickel alloy Brief Introduction

    Copper nickel alloy composes of copper, nickel and little other metal, such as Mn. CuNi alloy was used for making coins in ancient for the feature of high corrosion resistant. 

    2018-11-12 14:10:11

  • NEXTECK Nickel Chromium Aluminum Alloy

    Nickel Chromium Aluminum is one of numerous metal alloys sold by NEXTECK under the registered name NEXOHM®. Generally it is immediately available in most volumes as round wire in bare, oxidized or enameled condition, flat wires and stranded wires, ribbon, sheet and foil.

    2018-07-06 16:21:11

  • Nexteck Invar (UNS K93600) Introduction

    Invar​ (UNS K93600) is a metal of a nickel level of 36%, Fe of 63.8% and C of 0.2%. The name Invar comes from the word invariable as it does not change in length when exposed to temperature variations.

    2018-06-22 19:02:33

  • Scientists create atoms-thick Post-It notes for solar cells and circuits

    The new breakthrough in semiconductor construction might be helpful to make electronic device get smaller. Researchers from the University of Chicago and Cornell University are united to develop a method of making silicon films that are only as thick as a few atoms, allowing them to be stacked on top of one another many times over.

    2017-10-18 14:34:26

  • The First High-entropy Metal Alloy

    Using high pressure, scientists have created the first high-entropy metal alloy made of common metals to have a hexagonal close-packed (HCP) atomic structure.

    2017-08-21 14:49:46

PgUp1PgDn Go to

24-hour hotline:+86-400 882 8982

logo.png

Providing real-time and high quality service

NEXTECK (CHINA) - SHENZHEN
Tower A1001, Galaxy Century, No 3069, CaiTian Rd, Futian District, Shenzhen, China
Zip Code: 518026
Tel: +86-755-8256-1631
Fax:+86-755-8256-1691
E-mail:nexteck@nexteck.com
Hotline:+86-400 882 8982

PRODUCTION PLANT
Wenchuan Rd, Alley 5300/1, Baoshan District, Shanghai, China
Zip Code: 200942
Tel: +86-21-3638-0189
Fax: +86-21-3638-0109
E-mail: nexteck@nexteck.com.cn